Blogs - TheMasum.in

Hank Nash Hank Nash

0 Course Enrolled • 0 Course Completed

Biography

Reliable Project-Planning-Design Test Topics & Test Project-Planning-Design Questions

BTW, DOWNLOAD part of VCETorrent Project-Planning-Design dumps from Cloud Storage: https://drive.google.com/open?id=160_r1VqWN9WtoB4lpXus9JOA9mKPXvlL

Most experts agree that the best time to ask for more dough is after you feel your Project-Planning-Design performance has really stood out. Our Project-Planning-Design guide materials provide such a learning system where you can improve your study efficiency to a great extent. During the process of using our Project-Planning-Design Study Materials, you focus yourself on the exam bank within the given time, and we will refer to the real exam time to set your Project-Planning-Design practice time, which will make you feel the actual Project-Planning-Design exam environment and build up confidence.

NCARB Project-Planning-Design Exam Syllabus Topics:

Topic
Details

Topic 1

Building Systems, Materials, & Assemblies: This section of the exam measures skills of architectural designers and covers the understanding of building systems such as mechanical, electrical, and plumbing, along with structural and specialty systems. It also involves selecting appropriate materials and assemblies to align with program needs, budgets, and regulations.

Topic 2

Project Integration of Program & Systems: This section of the exam measures skills of project architects and focuses on integrating decisions about environmental conditions, codes, and building systems into one cohesive project design. It highlights how to configure the building and incorporate both program requirements and contextual conditions in a unified design approach.

Topic 3

Codes & Regulations: This section of the exam measures the skills of project architects and focuses on applying zoning laws, environmental rules, and building codes during the planning stage. Candidates are tested on how to integrate multiple regulatory requirements into a project’s design effectively.

Topic 4

Environmental Conditions & Context: This section of the exam measures skills of architectural designers and covers how to use site analysis information to determine building placement and environmental planning decisions. It emphasizes applying sustainable principles and considering the neighborhood context to guide project design.

Topic 5

Project Costs & Budgeting: This section of the exam measures skills of architectural designers and assesses the ability to evaluate design alternatives based on program goals, perform cost evaluations, and manage cost considerations throughout the design process.

>> Reliable Project-Planning-Design Test Topics <<

Test NCARB Project-Planning-Design Questions | Exam Project-Planning-Design Quizzes

With the development of the times, the pace of the society is getting faster and faster. If we don't try to improve our value, we're likely to be eliminated by society. Under the circumstances, we must find ways to prove our abilities. For example, getting the Project-Planning-Design Certification is a good way. If we had it, the chances of getting a good job would be greatly improved. However, obtaining the Project-Planning-Design certification is not an easy task.

NCARB ARE 5.0 Project Planning & Design (PPD) Sample Questions (Q79-Q84):

NEW QUESTION # 79
An architect is designing a mixed-use building and must provide fire separation between the various use types.
Which properties must be considered to meet the fire separation requirements? Check the three that apply.

A. Wall to structure connection
B. Air changes per hour
C. Wall assembly materials
D. Orientation of building
E. Occupancy type
F. Length of exit corridor

Answer: A,C,E

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
To meet fire separation requirements, the following must be considered:
Occupancy type (B): Different uses have different fire hazard classifications influencing separation.
Wall assembly materials (D): Materials define fire resistance ratings.
Wall to structure connection (A): Proper connection maintains fire separation integrity.
Air changes (C) relate to ventilation, not separation.
Exit corridor length (E) and building orientation (F) affect egress and solar exposure, not fire separation.
References:
ARE 5.0 PPD - Codes and Regulations, Fire Separation
The Architect's Handbook of Professional Practice, 15th Edition - Fire-Resistive Construction

NEW QUESTION # 80
Which exterior elements control daylighting? Check the three that apply.

A. Roof overhangs
B. Spandrel panels
C. Parapet walls
D. Horizontal louvers
E. Horizontal girt
F. Vertical louvers

Answer: A,D,F

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
Exterior shading devices control daylight penetration and solar heat gain:
Roof overhangs (A) shade upper window areas and reduce direct sunlight in summer.
Horizontal louvers (C) block high-angle summer sun but allow low-angle winter sun.
Vertical louvers (E) control low-angle sun from east/west directions and reduce glare.
Horizontal girts (B) and spandrel panels (D) are structural or opaque elements, not designed for daylight control.
Parapet walls (F) can shade roof edges but are not primary daylight controls.
References:
ARE 5.0 PPD - Environmental Conditions and Context, Daylighting and Solar Control The Architect's Handbook of Professional Practice, 15th Edition - Sustainable Design

NEW QUESTION # 81
Click in the structural bay of the elevation that is the most appropriate location to install steel rod cross bracing.

Answer:

Explanation:

Explanation:
the most appropriate location to install steel rod cross bracing is in the fourth structural bay, which corresponds to the bay on the far right side of the elevation.
* Steel rod cross bracing is typically installed in bays that are fully open or contain large door openings and require lateral support to resist racking forces (lateral loads such as wind or seismic forces).
* The fourth bay shows a large door opening without any visible solid wall or shear wall elements, making it structurally weaker against lateral loads and thus the most suitable for cross bracing.
* The first bay, with a smaller door or solid wall, and the other bays with more enclosed or glazed openings may have other structural elements providing lateral resistance.
* Installing the bracing in the fourth bay enhances structural stability and prevents lateral displacement or deformation.

NEW QUESTION # 82
When considering the IBC requirements, an architect can increase the number of options from which to select structural materials for an office building by doing which one of the following?

A. Limiting the area of the building
B. Increasing the occupant capacity
C. Omitting 2-hour fire ratings
D. Increasing the efficiency ratio

Answer: A

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
Limiting the building area within allowable maximums based on occupancy and type increases the range of acceptable structural materials because larger buildings have stricter fire and structural requirements.
Increasing occupant capacity (A) increases code stringency.
Increasing efficiency ratio (B) is not an IBC classification.
Omitting 2-hour fire ratings (D) is not permitted and would reduce material options.
Thus, reducing building area allows more flexibility in structural material choices under IBC.
References:
ARE 5.0 PPD - Codes and Regulations, Building Materials and Fire Ratings The Architect's Handbook of Professional Practice, 15th Edition - Building Codes

NEW QUESTION # 83

A new, sprinklered, mid-rise office building of Type II-A construction has a ground-level restaurant and offices above. The restaurant has an A-2 occupancy and the offices have a B occupancy. The architect needs to provide fire separation between the two occupancy types and select the most cost-efficient floor/ceiling assembly option.
Which one of the following assemblies is most appropriate?

A. 1-hour-rated assembly with open web steel joists @ 24" o.c.
B. 1-hour-rated assembly with 2 x 10 wood joists
C. 2-hour-rated assembly with lightweight precast concrete

Answer: A

Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
According to IBC Table 508.4, with sprinklers installed throughout (S), a 1-hour fire separation is required between A-2 and B occupancies in Type II-A construction.
Open web steel joists (C) can be used in 1-hour-rated assemblies, providing cost efficiency and structural flexibility.
Wood joists (A) might not meet Type II-A non-combustible requirements.
2-hour-rated precast concrete (B) is more costly than needed per code.
Thus, option C balances code compliance and cost.
References:
IBC Table 508.4
ARE 5.0 PPD - Codes and Regulations, Fire Separation
The Architect's Handbook of Professional Practice, 15th Edition - Fire-Resistive Construction

NEW QUESTION # 84
......

The VCETorrent is committed to making the NCARB Project-Planning-Design certification exam preparation simple, smart, and successful. To achieve this objective VCETorrent is offering top-notch and real Project-Planning-Design exam questions in three different formats. The names of these ARE 5.0 Project Planning & Design (PPD) (Project-Planning-Design) exam questions formats are PDF files, desktop practice test software, and web-based Project-Planning-Design practice test software.

Test Project-Planning-Design Questions: https://www.vcetorrent.com/Project-Planning-Design-valid-vce-torrent.html

BONUS!!! Download part of VCETorrent Project-Planning-Design dumps for free: https://drive.google.com/open?id=160_r1VqWN9WtoB4lpXus9JOA9mKPXvlL

Hank Nash Hank Nash

Biography

Recent Blogs

Importent

Pro Services

Pages